Skip to main content

Technical articles Β· Featured

Technical articles

Machining duplex and super duplex: long components, deep channels and residual stress

Machining duplex and super duplex requires control of cutting forces, residual stress and chip evacuation. Two practical examples show why the machining sequence matters.

  • Machining and manufacturability
  • 4 minutes
Read the article
Curved manifold block with large threaded ports, sealing faces and bores

Publications

All technical articles

  1. Curved manifold block with large threaded ports, sealing faces and bores

    Technical article

    Machining duplex and super duplex: long components, deep channels and residual stress

    Machining duplex and super duplex requires control of cutting forces, residual stress and chip evacuation. Two practical examples show why the machining sequence matters.

    • Machining and manufacturability
    • 4 minutes
    Read the answer
  2. Machined metal components with holes and elongated slots

    Technical article

    CNC machining: what is it and how does it work?

    What is CNC machining, and how does a drawing become a component? Read about milling, turning, material selection, workholding, costs and dimensional inspection.

    • Machining and manufacturability
    • 5 minutes
    Read the answer
  3. A slender metal shaft is held in the chuck of a lathe

    Technical article

    CNC turning: dimensions, workholding and surface quality

    How does CNC turning work? Explore how workholding, datums, slender workpieces and internal machining affect dimensions and surface quality.

    • Machining and manufacturability
    • 4 minutes
    Read the answer
  4. Various cutting tools stand in toolholders beside a machine

    Technical article

    CNC milling: design, workholding and manufacturability

    What is CNC milling and what makes a part suitable for it? Explore internal corners, tool access, workholding and the choice between 3 and 5 axes.

    • Machining and manufacturability
    • 4 minutes
    Read the answer
  5. A worker fits a part to a large assembly on the workbench

    Technical article

    Machine building: from functional need to tested machine

    How does a machine-building project progress? Learn how requirements, interfaces, engineering, assembly and acceptance tests connect for a machine or module.

    • Machine building and engineering
    • 3 minutes
    Read the answer
  6. A blue torch flame heats the surface of a metal workpiece

    Technical article

    Metalworking: which process suits your component?

    How do you choose a metalworking process? Compare machining, welding and finishing through geometry, material, tolerances and the required delivery condition.

    • Machining and manufacturability
    • 4 minutes
    Read the answer
  7. Measuring probe in a bore of a precision metal part

    Technical article

    Reverse engineering: from existing part to manufacturing specification

    What is reverse engineering of a component? Learn how function, measurement, wear assessment and validation contribute to a usable manufacturing specification.

    • Machine building and engineering
    • 3 minutes
    Read the answer
  8. Customer-specific heating boiler test unit in the workshop

    Technical article

    Special-purpose machine building: when does a custom machine make sense?

    When should you choose a custom machine? Assess process variation, standard modules, testability and maintenance before commissioning a special-purpose design.

    • Machine building and engineering
    • 4 minutes
    Read the answer
  9. Hwacheon VT-1650, vertical turning and milling centre

    Technical article

    Large work, fewer transfers: the Hwacheon VT-1650 is coming to Douna

    A new step for large, heavy turning work. With the forthcoming Hwacheon VT-1650, Douna aims to bring turning, milling and drilling closer together β€” with fewer transfers between machines.

    • Large-part turning
    • 4 minutes
    Read the answer
  10. You Ji YV-1600ATC in Douna’s production environment

    Technical article

    When is vertical turning suitable for a large workpiece?

    Vertical turning suits large, heavy, rotationally symmetrical workpieces when stable support, accessibility and controlled workholding are central considerations.

    • Large-part turning
    • 2 minutes
    Read the answer
  11. A metalworker wearing safety glasses and hearing protection works in the production hall

    Technical article

    Which factors determine how a forging is machined?

    Initial shape, mill scale, material behaviour, workholding, machining sequence and tolerances together determine how a forging is brought to its final dimensions in a controlled way.

    • Forgings
    • 2 minutes
    Read the answer
  12. Mitutoyo 3D measuring machine in Douna’s inspection room

    Technical article

    Why measure in a temperature-controlled inspection room?

    Temperature differences can affect parts and measuring equipment. A controlled room helps manage this influence; methods, datums and critical features determine the measurement setup.

    • Metrology and quality assurance
    • 2 minutes
    Read the answer

Would you like to apply this to your own technical question?